Category: PCB Designing

PCBs stand for Printed Circuit Boards that act as functional blocks for most of the electronic devices. Almost all modern electronic devices, such as medical scanning devices, computer systems, LEDs, home appliances, industrial manufacturing and power equipment, sensors and safety devices, smoke detectors etc. function on PCBs.

PCBs are designed to provide controlled and reliable electrical connections between various component terminals. The patterns of a PCB design are critical to its functional utility. They have alternatively placed layers of conductive and insulating material to allow routing of the electrical connections and to control signal integrity. 

Design specifications of a PCB may vary according to the application requirements of the respective electronic device. But broadly, we can categorise PCBs into following types:

TYPES OF PCBS

Single Sided PCBs

This is the most basic kind with a single layer of copper which acts as a conductor of electric current passing through the components. Being basic in nature, they aren’t very costly and are mostly used in case of simple circuit electronics like sensors, electric toys, calculators, LED boards etc. Also, they are easy to design and manufacture and repairing them doesn’t require much expertise. 

Double Sided PCBs

The Double Sided PCBs are quite similar to the Single sided PCBs. The only difference is that a  Double Sided PCB has two layers of conductive copper, placed on both top and bottom of the board. Holes are drilled in the circuit board that connect the metal parts to both the sides. They are used for comparatively more complex devices such as mobile phones, test equipment etc.

Multi-layered PCBs

A multi-layered PCB has at least three or more layers of conductive material. Designing a multi-layered PCB is a crucial process as there is a possibility of air being trapped between the layers. Therefore, utmost care needs to be taken while assembling a multi-layered PCB. However, the type of PCB is compact in size and has higher flexibility which makes it easier to incorporate controlled impedance features. They are best applicable for aerospace devices, x-ray and other testing devices, satellite systems, GPS technology etc.

Rigid PCBs

A Rigid PCB can hold as many layers of conductive material, there is no such specification on that. They can be single layered or double layered or multi-layered type PCB, depending on the application. What makes it rigid is that once the PCB is manufactured, it cannot be altered. A rigid PCB cannot be bend into any other shape. They are made of solid substrate with copper tracks. They are commonly used for devices of daily use like computing systems etc. 

Flexible PCBs

On the contrary, a flexible PCB is fabricated in a way that it can be folded or transformed into any desired shape. They are mostly placed in modern portable devices like hard disks, printers etc. that hold limited internal space due to their very compact structure.

Rigid-Flex PCBs

A Rigid Flex PCB is a type of a hybrid PCB board which has both – a rigid hard board connected with multiple flexible PCBs. Having a complex structure, designing and assembling process is more complicated and expensive. However, there is a growing demand for Rigid-Flex PCB due to its convenient applicability. Most commonly used for devices that require multiple circuit boards. 

High-Frequency PCBs

A High Frequency PCB is specially designed to meet the requirement of transmitting signal  to your electronic device. It can be either of the PCB kinds – flexible or rigid, majorly used for the purpose of incorporation high frequency flow rate. Such PCB designs are applicable in industries that require high-density interconnect such as telecommunication, military, aerospace etc.

Aluminium Backed PCBs

This PCB type is similar to any of the above mentioned PCB, the only difference is usage of aluminium as the conducting metal instead of copper. It inexpensive and environment friendly as it can be easily recycled and is non-toxic. They are used mostly for devices expected for high output power applications such as power supplies, traffic lights etc.

There are a number of PCB designers and manufacturers  in the market but it is always advisable to buy PCBs from a reputed and trusted name. Gelco is one such trusted and experienced manufacturers of different types of PCBs. The company has consistently provided their customers with high-quality circuit boards with excellent speed, and performance.

PCB or Printed Circuit Board is the heartbeat of your electronics. Any malfunctioning can lead to a complete shutdown of your device. The process of designing and assembling a PCB is a critical job, which makes it essential for a PCB designer to be thorough with the hardware designs for uninterrupted manufacturing of the circuit board.

Gelco, with its years of experience in PCB designing and manufacturing, is here to share its expertise with you and make things convenient. Below we share with you some commonly faced problems that might help you avoid any manufacturing issues.

Exposure to High Temperature

PCB manufacturing process exposes the board to high temperatures. But not all components hold the capacity to withstand such exposure and can lead to overheating and burning of the components on the board. Make sure there is enough space between the components for the heat to pass through. This reduces the chances of trapping of heat in between the components that cause overheating.

Quality of the Components

Usually, the components used on the board are poorly manufactured or outdated. The designer needs to be aware of the quality of the components being used. Outdated or old components might not be that effective which could affect the functioning of the board. Also, check for loose components, any residual on the boards or any connection issue to avoid damage.

Suitable Material

Not all materials might be functional on different circuit types. Each circuit type requires specific materials for its smooth functioning. Ensure the material being used for fabrication or on the board is well suited as per the operating environment.

Deposition Error

A common problem that occurs is that during the deposition process if the copper layer isn’t evenly spread, voids are created in the plating. This interrupts the smooth flow of electric currents and can also cause air bubbles and contamination.

Copper Exposure to cause Corrosion

Copper is an active component of a PCB but due to its vulnerability towards corrosion, it can cause many issues. Usually, the copper is layered with other materials to avoid exposure which reduces the risk of corrosion. This makes it essential for the designer to check if the copper is properly layered and there is sufficient clearance between the copper and the edge. Because if it isn’t, then there are chances that during trimming the coating also gets trimmed and leave the copper open for exposure. The PCB design software has a feature – Design Rule Check, this can come in handy to check for such errors. Missing solder between the pads can lead to the formation of a solder bridge during assembly which can also cause copper exposure.

Starved Thermals

One of the key components for the soldering process are the thermals. They connect the pads to the surface and help the pads to disperse heat. PCB designers need to be cautious of the formation of any voids as they restrict the heat transfer and can cause overheating. The situation is common if the vias are placed too close to each other.

Angles as Acid Traps

Mostly during the etching process, acid gets trapped in the angels. The trapped acid eats up the materials being used and can cause issues with connections leading to defective circuits. Cupric chloride etching is suggested as it doesn’t face such a problem.

Chemical Leakages

During the entire PCB manufacturing, many chemicals are used. One must ensure of any leakage as they leave traces behind that could cause corrosion of material and further damage like a short circuit.

Design Flaws

The PCB designer needs to be sure that the design of the circuit board is free from any flaws. One of the common design flaws is electromagnetic interference. The manufacturing process generates a lot of electromagnetic energy. If PCB isn’t well designed the energy generated can cause interference with the circuit functioning and can damage the board.

While designing or manufacturing a PCB, do keep the above points in mind to avoid any issues. Also, it is suggested to make use of DFM (Design for Manufacturability). It helps to identify any possible problems and ensures their elimination during the assembly process itself. It thoroughly inspects the layout of the board and any errors can be fixed before assembling the PCB, hence saves time, effort and any possible damage.